1.5T/h sus RO surface water treatment for Tube/Micro Circuit/Electronic Component industries

1.surface water treatment 2.high quality pure water 3.pure water conductivity 0.1us/cm 4.high recovery rate:65-75%

1.5T/h RO isurface water treatment for Tube/Micro Circuit/Electronic Component industrial1.RO industrial water purifier 2.high quality pure water3.pure water conductivity 0.1us/cm4.high recovery rate:65-75%

 Materials of Construction

Frame: Stainless steel 304

Pre-treatment Filter: Stainless SteelMembrane Housing: FRP/Stainless SteelLow Pressure Pipe: UPVCHigh Pressure Pipe: Stainless SteelPump: Stainless Steel

Functions

RO membranes auto wash and manual wash

RO membranes manual wash with medicinepure water high water level auto stop,low water level auto start

Multi-phases pump protected without water

Protected when no power, poor power, larger electrical current,short circuit, creepage of electricity

Operating Principle: 1. raw water pump-- provide the pressure to quartz sand filter/active carbon filter 2. Silica Sand filter-- get rid of turbidity, suspended matter, organic matter, colloid ,ect.3. Active Carbon filter--Remove the color, free chloride, organic matter, harmful matter ,ect.4. Softener—using ion exchange resin to exchange "ions" of calcium and magnesium is the most common and the easiest method of removing hardness of water and render the water suitable for utility purpose

5. Micron filter--prevent any deposition of large Particles, most of the bacteria, and viruses into the RO membrane, The accuracy is 5um, for holding back any large particulates such as large iron, dust, suspended matter, impurity. 6. High pressure pump-- Provide the high pressure to RO membrane(at least 2.0 Mpa). 7. RO system--RO system is the main part of pure water treatment plant. The RO membrane's desalt rate can reach as high as 99%, it is capable of removing over 99% of ions, bacterias, particles and 98% of organic.

1.5T/h sus RO surface water treatment for Tube/Micro Circuit/Electronic Component industries